Ross ASI-310 Uživatelský manuál stáhnout pdf (Strana 25)

DRA-8604 User Manual (Iss. 02) Configuration • 3–3

Monitoring Features

The following sections describe the card-edge LEDs. Refer to Figure 3.2 for LED locations.

Figure 3.2 LED Locations

Status LEDs

Basic LED displays and descriptions are provided in Table 3.1.

Table 3.1 Status LEDs

LED Color Display and Description

PWR

Green

When lit green, this LED indicates that the card is functioning normal

and that no anomalies have been detected.

Flashing Green

When flashing green, this LED indicates that the Bootload button was

pressed, and the card is receiving a new software load from the frame.

Flashing Green

and Orange

When lit green with flashing orange, this LED indicates a signal or

configuration problem. Verify the signal status and settings.

Amber

When lit amber, this LED indicates the card is running internal

diagnostics while powering up.

Red

When lit red or flashing red, this LED indicates the card is not

operational. Re-seat card in frame, check the rear module type and

connections, or call Ross Video Technical Support.

Off When unlit, this LED indicates there is no power to the card.

INPUT #

a. The INPUT A LED reports on the Channel A source and the INPUT B LED reports on the Channel B (or Backup when

enabled in DashBoard) source.

Green

When lit green, this LED indicates that a valid SDI input signal is

present for the specified channel.

Red

When lit red, this LED indicates that the SDI input signal is missing or

invalid for the specified channel.

Bootload Button

PWR LED

INPUT A LED

INPUT B LED

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 43 44

Žádné komentáře

Ross ASI-310 Uživatelský manuál Strana 25